167 kits found for Metric Thread Bolt Kits
ARP Stainless - 5-Packs - All Sizes
STAINLESS STEEL: Ideally suited for many automotive and marine applications because stainless is tolerant of heat and resistant to rust and corrosion. ARP Stainless is specially alloyed for extra durability. It’s polished using a proprietary process to produce a beautiful finish. Tensile strength is typically rated at 180,000 psi.

First | Previous | Page 3 of 7 | Next | Last		 Didn't find the kit you were looking for?
Diameter -
Thread Pitch		 Under-head Length (UHL) Socket Size Kit # Torque Value* Add to List
M10 x 1.25 25mm 12mm hex 763-1002 54 ft-lbs (73.2 Nm)
M10 x 1.25 30mm 12mm hex 763-1003 54 ft-lbs (73.2 Nm)
M10 x 1.25 35mm 12mm hex 763-1004 54 ft-lbs (73.2 Nm)
M10 x 1.25 40mm 12mm hex 763-1005 54 ft-lbs (73.2 Nm)
M10 x 1.25 45mm 12mm hex 763-1006 54 ft-lbs (73.2 Nm)
M10 x 1.25 50mm 12mm hex 763-1007 54 ft-lbs (73.2 Nm)
M10 x 1.25 60mm 12mm hex 763-1008 54 ft-lbs (73.2 Nm)
M10 x 1.25 70mm 12mm hex 763-1009 54 ft-lbs (73.2 Nm)
M10 x 1.25 80mm 12mm hex 763-1010 54 ft-lbs (73.2 Nm)
M10 x 1.25 90mm 12mm hex 763-1011 54 ft-lbs (73.2 Nm)
M10 x 1.25 100mm 12mm hex 763-1012 54 ft-lbs (73.2 Nm)
M12 x 1.50 25mm 14mm hex 764-1001 98 ft-lbs (132.9 Nm)
M12 x 1.50 30mm 14mm hex 764-1002 98 ft-lbs (132.9 Nm)
M12 x 1.50 35mm 14mm hex 764-1003 98 ft-lbs (132.9 Nm)
M12 x 1.50 40mm 14mm hex 764-1004 98 ft-lbs (132.9 Nm)
M12 x 1.50 45mm 14mm hex 764-1005 98 ft-lbs (132.9 Nm)
M12 x 1.50 50mm 14mm hex 764-1006 98 ft-lbs (132.9 Nm)
M12 x 1.50 60mm 14mm hex 764-1007 98 ft-lbs (132.9 Nm)
M12 x 1.50 70mm 14mm hex 764-1008 98 ft-lbs (132.9 Nm)
M12 x 1.50 80mm 14mm hex 764-1009 98 ft-lbs (132.9 Nm)
M12 x 1.50 90mm 14mm hex 764-1010 98 ft-lbs (132.9 Nm)
M12 x 1.50 100mm 14mm hex 764-1011 98 ft-lbs (132.9 Nm)
M12 x 1.75 25mm 14mm hex 765-1001 98 ft-lbs (132.9 Nm)
M12 x 1.75 30mm 14mm hex 765-1002 98 ft-lbs (132.9 Nm)
*Torque notes: The torque values represented here are intended to be for general information only, not for specific installations. On specific installations, where the supplied instructions deviate from the torque values listed here, always follow the specific instructions packaged with the kit. Always lubricate the fastener prior to applying torque to ensure accurate readings. The values below are for use with ARP Ultra-Torque®.

First | Previous | Page 3 of 7 | Next | Last