333 kits found for Metric Thread Bolt Kits
All Materials - 5-Packs - All Sizes

Page 1 of 14 | Next | Last		 Didn't find the kit you were looking for?
Diameter -
Thread Pitch		 Under-head Length (UHL) Socket Size Kit # Torque Value* Add to List
M6 x 1.00 20mm 8mm hex 660-1001 11 ft-lbs (14.9 Nm)
M6 x 1.00 25mm 8mm hex 660-1002 11 ft-lbs (14.9 Nm)
M6 x 1.00 30mm 8mm hex 660-1003 11 ft-lbs (14.9 Nm)
M6 x 1.00 35mm 8mm hex 660-1004 11 ft-lbs (14.9 Nm)
M6 x 1.00 40mm 8mm hex 660-1005 11 ft-lbs (14.9 Nm)
M6 x 1.00 45mm 8mm hex 660-1006 11 ft-lbs (14.9 Nm)
M6 x 1.00 50mm 8mm hex 660-1007 11 ft-lbs (14.9 Nm)
M6 x 1.00 55mm 8mm hex 660-1008 11 ft-lbs (14.9 Nm)
M6 x 1.00 60mm 8mm hex 660-1009 11 ft-lbs (14.9 Nm)
M6 x 1.00 65mm 8mm hex 660-1010 11 ft-lbs (14.9 Nm)
M6 x 1.00 70mm 8mm hex 660-1011 11 ft-lbs (14.9 Nm)
M6 x 1.00 75mm 8mm hex 660-1012 11 ft-lbs (14.9 Nm)
M6 x 1.00 80mm 8mm hex 660-1013 11 ft-lbs (14.9 Nm)
M6 x 1.00 90mm 8mm hex 660-1014 11 ft-lbs (14.9 Nm)
M6 x 1.00 100mm 8mm hex 660-1015 11 ft-lbs (14.9 Nm)
M6 x 1.00 12mm 8mm hex 660-1016 11 ft-lbs (14.9 Nm)
M6 x 1.00 16mm 8mm hex 660-1017 11 ft-lbs (14.9 Nm)
M6 x 1.00 135mm 8mm hex 660-1018 11 ft-lbs (14.9 Nm)
M8 x 1.25 20mm 10mm hex 661-1001 24 ft-lbs (32.5 Nm)
M8 x 1.25 25mm 10mm hex 661-1002 24 ft-lbs (32.5 Nm)
M8 x 1.25 30mm 10mm hex 661-1003 24 ft-lbs (32.5 Nm)
M8 x 1.25 35mm 10mm hex 661-1004 24 ft-lbs (32.5 Nm)
M8 x 1.25 40mm 10mm hex 661-1005 24 ft-lbs (32.5 Nm)
M8 x 1.25 45mm 10mm hex 661-1006 24 ft-lbs (32.5 Nm)
*Torque notes: The torque values represented here are intended to be for general information only, not for specific installations. On specific installations, where the supplied instructions deviate from the torque values listed here, always follow the specific instructions packaged with the kit. Always lubricate the fastener prior to applying torque to ensure accurate readings. The values below are for use with ARP Ultra-Torque®.

Page 1 of 14 | Next | Last