| 464 kits found for SAE Bolt Kits ARP Stainless - 5-Packs - All Sizes |
||
| STAINLESS STEEL: Ideally suited for many automotive and marine applications because stainless is tolerant of heat and resistant to rust and corrosion. ARP Stainless is specially alloyed for extra durability. It’s polished using a proprietary process to produce a beautiful finish. Tensile strength is typically rated at 180,000 psi. | ||
 |
|
Didn't find the kit you were looking for? |
| Diameter - Thread Pitch |
Under-head Length (UHL) | Socket Size | Kit # | Torque Value* | Add to List |
|---|
| 7/16˝-14 | 5.000˝ | 1/2 hex | 624-5000 | 70 ft-lbs (94.9 Nm) | |
| 3/8˝-16 | 0.750˝ | 7/16 hex | 625-0750 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 1.000˝ | 7/16 hex | 625-1000 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 1.250˝ | 7/16 hex | 625-1250 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 1.500˝ | 7/16 hex | 625-1500 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 1.750˝ | 7/16 hex | 625-1750 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 2.000˝ | 7/16 hex | 625-2000 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 2.250˝ | 7/16 hex | 625-2250 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 2.500˝ | 7/16 hex | 625-2500 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 2.750˝ | 7/16 hex | 625-2750 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 3.000˝ | 7/16 hex | 625-3000 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 3.250˝ | 7/16 hex | 625-3250 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 3.500˝ | 7/16 hex | 625-3500 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 3.750˝ | 7/16 hex | 625-3750 | 45 ft-lbs (61 Nm) | |
| 3/8˝-16 | 4.000˝ | 7/16 hex | 625-4000 | 45 ft-lbs (61 Nm) | |
| 7/16˝-14 | 1.500˝ | 7/16 hex | 626-1500 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 1.750˝ | 7/16 hex | 626-1750 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 2.000˝ | 7/16 hex | 626-2000 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 2.250˝ | 7/16 hex | 626-2250 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 2.500˝ | 7/16 hex | 626-2500 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 2.750˝ | 7/16 hex | 626-2750 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 3.000˝ | 7/16 hex | 626-3000 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 3.250˝ | 7/16 hex | 626-3250 | 70 ft-lbs (94.9 Nm) | |
| 7/16˝-14 | 3.500˝ | 7/16 hex | 626-3500 | 70 ft-lbs (94.9 Nm) | |
| *Torque notes: The torque values represented here are intended to be for general information only, not for specific installations. On specific installations, where the supplied instructions deviate from the torque values listed here, always follow the specific instructions packaged with the kit. Always lubricate the fastener prior to applying torque to ensure accurate readings. The values below are for use with ARP Ultra-Torque®. | |||||