The best way to make sure that carburetors stay perfectly sealed to the intake manifold is through the use of ARP’s carb studs, which feature J-form threads to resist loosening from vibration. They’re offered in a variety of heights to accommodate most any combination of carb and spacer, and are available in 8740 chrome moly with a black oxide finish or rust-proof stainless steel. Special ARP Pro Series NASCAR type stud kits have one of the studs drilled to facilitate sealing the carburetor in the engine by race officials. All carb stud kits come with hex nuts and washers.
|
|
Page 1 of 2 | Next | Last |
Didn't find the kit you were looking for?
|
Standard, 8740, hex
OAL (Qty: 4) | 1.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2401
|
1" spacer, 8740, hex
OAL (Qty: 4) | 2.700 | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2402
|
1/2" spacer, 8740, hex
OAL (Qty: 4) | 2.225˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2403
|
2" spacer, 8740, hex
OAL (Qty: 4) | 3.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2404
|
3" spacer, 8740, hex
OAL (Qty: 4) | 4.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2405
|
1-1/4" Moroso spacer, 8740, hex
OAL (Qty: 4) | 3.200˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2408
|
2" Moroso spacer (top/bottom studs), 8740, hex
OAL 1 (Qty: 4) | 1.250˝ | Thread Size | 5/16˝ | OAL 2 (Qty: 4) | 1.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | |
200-2409
|
Dominator with 1/2" or 1" spacer
OAL (Qty: 4) | 3.200˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2412
|
Quadrajet (all) with 1/4" base gasket, 8740, hex
OAL 1 (Qty: 2) | 1.700˝ | Thread Size 1 | 5/16˝ | OAL 2 (Qty: 2) | 4.400˝ | Thread Size 2 | 5/16˝ | nuts, washers included | | | | | | | |
200-2413
|
Dominator, no spacer, 8740, hex
OAL (Qty: 4) | 2.225˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2414
|
Dominator, with spacer, 8740, hex
OAL (Qty: 4) | 4.400˝ | Thread Size 1 | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2415
|
HP Dominator, no spacer, 8740, hex
OAL (Qty: 4) | 2.225˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2416
|
HP Dominator, w/ 1/2" spacer, 8740, hex
OAL (Qty: 4) | 2.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2417
|
HP Dominator, w/ 1" spacer
OAL (Qty: 4) | 3.200˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
200-2418
|
Standard, SS, hex
OAL (Qty: 4) | 1.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2401
|
1" Spacer, SS, hex
OAL (Qty: 4) | 2.700˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2402
|
1/2" Spacer, SS, hex
OAL (Qty: 4) | 2.225˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2403
|
1-1/4˝ Moroso spacer, SS, hex
OAL (Qty: 4) | 3.200˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2408
|
Dominator with 1/2" or 1" spacer, SS, hex
OAL (Qty: 4) | 3.200˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2412
|
Quadrajet (all) with 1/4" base gasket, SS, hex
OAL 1 (Qty: 2) | 1.700˝ | Thread Size 1 | 5/16˝ | OAL 2 (Qty: 2) | 4.400˝ | Thread Size 2 | 5/16˝ | nuts, washers included | | | | | | | |
400-2413
|
Dominator, no spacer
OAL (Qty: 4) | 2.225˝ | Thread Size | 5/16˝ | nuts, washers included | | | | | | | | | | | |
400-2414
|
No spacer with Moroso #64919 return spring kit, 8740, black oxide, hex
200-2421
|
No spacer with Moroso #64919 return spring kit, ARP Stainless, hex
400-2421
|
No spacer with Moroso #64919 return spring kit, ARP Stainless, drilled, hex
300-2421
|